BRAIDED CORD safety lanyard

Lanyard made of polyamide braided cord, is intended for use in conjunction with safety belts, as insurance during work, where damage to the sling against sharp edges of buildings and structures is excluded. Also, this sling can be used when performing electrical work, where it is necessary to use a sling made of insulated material. Safety slings made of woven polyamide cord are the most resistant to abrasion in comparison with other textile slings of this line.

PERFORMANCE OPTIONS

№	Sling scheme	Designation	Description	Specifications
1.		1СШ1	Removable. Equipped with two small K20 carbines on both sides.	Weight no more than 1.06 kg. The length of the sling: from 1060 mm to 1550 mm.
2.		1СШ2	Removable. It is equipped with two carbines small K20 on the one hand and large K55 on the other.	Weight no more than 1.06 kg. Line length: from 1150 mm to 1640 mm.
3.		2СШ2	Removable. Equipped with two large K55 carbines on both sides.	Weight is not more than 1.35 kg. Line length: from 1220 mm to 1820 mm.

SHOCK ABSORBER

The shock absorber is used on slings with belts having shoulder and hip straps. Provides a reduction in dynamic loads on a person when falling from a height. The shock absorber can be used with all types of safety slings. The minimum mounting height for the installer when using a safety system with a shock absorber is 4 meters.

Specifications:

Overall dimensions: 280х55х35 mm.
The length in the open state (after opening the shock absorber) 1580 ± 50 mm.
Weight 0.18 kg.
The beginning force of the shock absorber opening is not less than 1960 N or 200 kgf (the shock absorber is structurally made in such a way that when there is a force exceeding the beginning force of the shock absorber opening, it opens and the textile “damper” opens).
The breaking strength of a fully open shock absorber is not less than 15 kN.
Braking force when a load of 100 kg falls - not more than 3925 N (400 kgf).