Steel rope safety lanyard

Lanyard made of steel rope in PVC braid, designed for use with safety belts, as insurance for structural elements with sharp edges, as well as when performing hot work at heights (electric welding, gas cutting, etc.) as an individual protection against falling from a height. A steel rope sling has a lower dead weight compared to a chain sling.

PERFORMANCE OPTIONS

№	Sling scheme	Designation	Description	Specifications
1.		1СТ1	Removable. Equipped with two small K20 carbines on both sides.	Weight is not more than 0.8 kg. Length of sling: 1589 mm.
2.		1СТ2	Removable. Equipped with one small K20 carbine on one side and a large K55 on the other.	Weight is not more than 1.3 kg. The length of the sling: 1678 mm.
3.		2СТ2	Removable. Equipped with two large K55 carbines on both sides.	Weight is not more than 1.3 kg. The length of the sling: 1767 mm.

SHOCK ABSORBER

The shock absorber is used on slings with belts having shoulder and hip straps. Provides a reduction in dynamic loads on a person when falling from a height. The shock absorber can be used with all types of safety slings. The minimum mounting height for the installer when using a safety system with a shock absorber is 4 meters.

Specifications:

Overall dimensions: 280х55х35 mm.
The length in the open state (after opening the shock absorber) 1580 ± 50 mm.
Weight 0.18 kg.
The beginning force of the shock absorber opening is not less than 1960 N or 200 kgf (the shock absorber is structurally made in such a way that when there is a force exceeding the beginning force of the shock absorber opening, it opens and the textile “damper” opens).
The breaking strength of a fully open shock absorber is not less than 15 kN.
Braking force when a load of 100 kg falls - not more than 3925 N (400 kgf).