Webbing safety lanyard

Lanyard made of polyamide tape, designed to be used in conjunction with safety belts, as insurance during work, where damage to the sling against the sharp edges of buildings and structures is excluded. Also, this sling can be used when performing electrical work, where it is necessary to use a sling made of insulated material.

PERFORMANCE OPTIONS

№	Sling scheme	Designation	Description	Specifications
1.		1СС1	Removable. Equipped with two small K20 carbines on both sides.	Weight is not more than 0.7 kg. Line length of the sling: from 1050 mm to 1650 mm.
2.		1СС2	Removable. It is equipped with a small K20 carbine on one side and a large K55 on the other.	Weight is not more than 0.95 kg. The length of the sling: from 1150 mm to 1750 mm.
3.		2СС2	Removable. Equipped with two large K55 carbines on both sides.	Weight is not more than 1.2 kg. The length of the sling: from 1235 mm to 1835 mm.

SHOCK ABSORBER

The shock absorber is used on slings with belts having shoulder and hip straps. Provides a reduction in dynamic loads on a person when falling from a height. The shock absorber can be used with all types of safety slings. The minimum mounting height for the installer when using a safety system with a shock absorber is 4 meters.

Specifications:

Overall dimensions: 280х55х35 mm.
The length in the open state (after opening the shock absorber) 1580 ± 50 mm.
Weight 0.18 kg.
The beginning force of the shock absorber opening is not less than 1960 N or 200 kgf (the shock absorber is structurally made in such a way that when there is a force exceeding the beginning force of the shock absorber opening, it opens and the textile “damper” opens).
The breaking strength of a fully open shock absorber is not less than 15 kN.
Braking force when a load of 100 kg falls - not more than 3925 N (400 kgf).