Read the 2 reviews
A sling made of a metal chain in a protective canvas cover, is intended for use in conjunction with safety belts, as insurance for structural elements with sharp edges, and also when performing hot work at heights (electric welding, gas cutting, etc.) as a means of personal protection against falling from a height.
PERFORMANCE OPTIONS
|
№ |
Sling scheme |
Designation |
Description |
Specifications |
|
1. |
 |
1СЛ1 |
Removable. Equipped with two small K20 carbines on both sides. |
Weight is not more than 0.9 kg. The length of the sling: 1325 mm. |
|
2. |
 |
1СЛ2 |
Removable. It is equipped with two carbines small K20 on the one hand and large K55 on the other. |
Weight is not more than 1.15 kg. The length of the sling: 1626 mm.
|
|
3. |
 |
2СЛ2 |
Removable. Equipped with two large K55 carbines on both sides. |
Weight is not more than 1.63 kg. The length of the sling: 1500 mm.
|
SHOCK ABSORBER
The shock absorber is used on slings with belts having shoulder and hip straps. Provides a reduction in dynamic loads on a person when falling from a height. The shock absorber can be used with all types of safety slings. The minimum mounting height for the installer when using a safety system with a shock absorber is 4 meters.
Specifications:
Overall dimensions: 280х55х35 mm.
The length in the open state (after opening the shock absorber) 1580 ± 50 mm.
Weight 0.18 kg.
The beginning force of the shock absorber opening is not less than 1960 N or 200 kgf (the shock absorber is structurally made in such a way that when there is a force exceeding the beginning force of the shock absorber opening, it opens and the textile “damper” opens).
The breaking strength of a fully open shock absorber is not less than 15 kN.
Braking force when a load of 100 kg falls - not more than 3925 N (400 kgf).
Viewed products
