You can buy a gripper for horizontal movement of the sheet in our stores in Chisinau, Bălți or order delivery anywhere in UkraineClamps for horizontal movement of the sheet are ideal for cases when, when moving metal sheet in a horizontal position, it is necessary to keep the surface of the sheet in its original, undamaged state. The horizontal clamp for the sheet is hung on slings, which, in turn, can be fixed on the traverse.
This type of clamp is best used with a traverse, but if this equipment is not available, it can also be used with slings. When ordering, be sure to consult with our specialist on the correct selection of slings and the possibility of using these clamps together with a slings in your specific case.
Note!
Standard clamps have a minimum load limit of 10% of the maximum lifting capacity marked on the clamp body. In simple words - it will not be possible to lift a sheet of metal weighing less than 200 kg with grippers with a working load of 2 tons. The gripper tongue will not be able to securely fix the sheet and in this case the sheet will bend, spring and jump out of the clamp.
You can find all slings, traverses and clamps on our website or by calling.
|
Designation |
WLL pair of grippers, t |
Open width S, мм |
H, мм |
L, мм |
B, мм |
D, мм |
Weight, kg |
|
Clamp for horizontal movement of the sheet |
0,25 |
0-20 |
150 |
125 |
55 |
20 |
3 |
|
0,5 |
65 |
||||||
|
1 |
0-25 |
170 |
140 |
70 |
25 |
4 |
|
|
2 |
0-40 |
280 |
220 |
90 |
30 |
6 |
|
|
3 |
0-45 |
300 |
230 |
95 |
9 |
||
|
4 |
0-50 |
320 |
250 |
120 |
36 |
14 |
|
|
5 |
330 |
18 |
|||||
|
6 |
0-60 |
340 |
265 |
140 |
40 |
24 |
|
|
8 |
370 |
150 |
31 |
You can buy a clamps for horizontal movement of the sheet in our stores in Chisinau, Bălți or order delivery anywhere in Ukraine
Viewed products
