Universal Clamp DSQА
- Clamp for vertical lifting and tilting of the sheet.
- Safety factor: 4:1.
- Material of manufacture: high strength steel.
- Coating: painting.
- Standard: EN 13155: 2018.
- It is accompanied by a quality certificate.
- Warranty: 12 months.
Vertical clamp is used for lifting and tilting sheet metal. Vertical clamp can be applied singly or in pairs. The upper link of clamp has two degrees of freedom. Vertical clamp complies with the modern standard EN 13155: 2014.
All clamps are mandatory tested at the stand, accompanied by a passport and a guarantee.
Note!
Standard cargo clamps have a minimum load limit of 10% of the maximum load capacity indicated on the clamp body. Standard vertical clamps are also suitable for lifting and moving steel sheets with a hardness of not more than 37 HRC.
|
Carrying capacity, t (one clamp) |
Jaw, мм |
A, мм |
B, мм |
C, мм |
D, мм |
E, мм |
F, мм |
H, мм |
Weight, kg |
|
1000 |
0-22 |
22 |
123 |
65 |
275 |
48 |
40 |
83 |
3,5 |
|
2000 |
0-30 |
30 |
155 |
79 |
315 |
56 |
45 |
86 |
5,5 |
|
3000 |
0-40 |
40 |
182 |
90 |
356 |
48 |
50 |
90 |
11,0 |
|
5000 |
0-50 |
50 |
222 |
92 |
424 |
58 |
60 |
102 |
16,5 |
- Clamp for vertical lifting and tilting of the sheet.
- Safety factor: 4:1.
- Material of manufacture: high strength steel.
- Coating: painting.
- Standard: EN 13155: 2018.
- It is accompanied by a quality certificate.
- Warranty: 12 months.
Viewed products
