Sleeve anchor with hook
- Sleeve anchor with hook.
- Material of manufacture: steel.
- Coating: galvanized.
- Accompanied by a quality certificate.
- Warranty: 6 months.
The sleeve anchor with a hook is designed for stationary mounting of extensions or other rigging structures. Suitable for fastening to concrete, brick or stone. The main areas of application are construction, installation of suspended structures, extensions. The spacer structure provides a secure anchor that prevents tearing. The anchor has a galvanized coating. The working load of the anchor is 25% of the load on the separation.
Anchor designation corresponds to the diameter of the thread.
.jpg "Анкер с крюком")
|
Designation \thread, d |
Drill diameter D, мм |
Anchor length L, мм |
Hook length L1, мм |
Breakaway load, kgf |
Weight 1 pc kg |
|
M6 |
8 |
60 |
95 |
1200 |
0,024 |
|
M8 |
10 |
70 |
105 |
1700 |
0,050 |
|
M10 |
12 |
120 |
160 |
2500 |
0,100 |
Installation instructions
An anchor can be fixed in the following materials - concrete, stone, brick, in an exceptional case - in a hollow block or hollow brick.
Drill a hole.
Clean the hole from dust by blowing.
Insert the anchor all the way.
Tighten the anchor a few turns.
- Sleeve anchor with hook.
- Material of manufacture: steel.
- Coating: galvanized.
- Accompanied by a quality certificate.
- Warranty: 6 months.
Viewed products
