Manual сlamp Quick-UP DX BE403

  • Climbing Technology clamp BE403;
  • Tested according to: EN 567: 1997, EN 12841: 2006-B;
  • Accompanied by a quality certificate;
  • Weight: 215g;
  • Rope diameter: 8-13 mm;
  • Warranty: 12 months;
  • Manufacturer: Italy 

More details

Select attributes:

The QUICK-UP DX is a right-hand (left-hand) rope ascent. The ergonomic rubber-coated handle allows you to comfortably hold the clip even when wearing gloves or mittens.

The special design of the cam with 3 rows of teeth prevents the accumulation of dirt, and the rather large opening in the handle allows any carabiner to rotate freely. Also, the cam is equipped with a special patented clamp release system when it rests on a knot or, if necessary, lower the device lower without removing it from the rope.

The double hole in the upper part of the QUICK-UP DX clip allows you to freely snap in the carabiner to prevent spontaneous slippage of the device when the rope is bent (on a break) or on icy and wet ropes (the upward moving carabiner together with the ascender cleans up frozen dirt and snow better).

The special design of the cam allows the clamp to be easily moved down the rope without unplugging it from the rope. To do this, you need to lightly push the cam retraction lever, but not open it completely. In this case, the ascender will be lowered along the rope without breaking contact with the rope and, accordingly, without compromising safety.

 

    • Climbing Technology clamp BE403;
    • Tested according to: EN 567: 1997, EN 12841: 2006-B;
    • Accompanied by a quality certificate;
    • Weight: 215g;
    • Rope diameter: 8-13 mm;
    • Warranty: 12 months;
    • Manufacturer: Italy